F Igure 2-13 - Honeywell DPR180 Manual

Pcmcia option
Hide thumbs Also See for DPR180:
Table of Contents

Advertisement

30. Put in place the MMI flat cable on the PCMCIA cover.
31. Fix it with the 2 flat cable clips supplied (with foam). (See ref. A, Figure 2-13)
A
32. Ensure the MMI can open properly.
- Open the MMI fully.
- Remove the protection of the double-side adhesive tape located on the PCMCIA cover.
- Fix the MMI flat cable.
- Put in place the MMI flat cable at the rear of the PCMCIA cover. (See ref. C, Figure 2-13)
33. Put in place the third MMI flat cable clip (not supplied) at the rear of the printer chassis.
(See ref. B, Figure 2-13).
34. Connect the MMI flat cable to the CPU Board (see Figure 2-14). Ensure the connectors are
located correctly.
10
C
B
Figure 2-13
PCMCIA Option Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dpr250

Table of Contents