Page 1
USER MANUAL ZKBio810 Series Date: December, 2018 Version 1.0...
Page 2
Important Claim Firstly, thank you for purchasing this hybrid-bio terminal. Before using, please read this manual carefully to avoid the unnecessary damage! The company reminds you that the proper use will improve the use affect and authentication speed. No written consent from our company, any unit, or individual isn’t allowed to excerpt, copy the content of this manual in part or in full, also spread in any form.
Page 3
Copyrights Ⓒ Copyright 2017 ZKTeco Co. Ltd. All rights reserved. All rights reserved. Except as specifically permitted herein, no portion of the information in this document may be reproduced in any form or by any means without the prior written permission from ZKTeco.
Page 4
Safety Instructions Read these instructions carefully. Keep these instructions for future reference. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or sprayed detergent for cleaning. Use moisture sheet or cloth for cleaning. Please keep this equipment from humidity. Lay this equipment on a reliable surface when install.
Packing List 1.1. Standard Accessories System (with stand) Power Adapter Power Cord Driver Bank 1.2 Optional Accessories ZK810 Series User Manual...
Page 7
a. Single MSR b. VFD c. 8” or 10.4” 2 Display d. 1D or 2D Attached Type Barcode Scanner e. 1D or 2D Handheld Type Barcode Scanner Thermal Printer g. Cash Drawer ZK810 Series User Manual...
System View 2.1. Rear View ☆ Please make sure 12V DC plug in the right direction before plugging in DC jack. 2.2. Back View VFD&LCD Cover/10” 2nd (optional) MSR/i-Button/RFID (optional) 1D or 2D Attached HDD Cover Type Barcode Scanner ZK810 Series User Manual...
W_DISABLE# +V1.5V RESET# PCIE_RX_N +3.3V_AUX +V3.3V PCIE_RX_P +V1.5V 3.6. Int. Speaker Pin Definition Definition Left Out + Left Out - Right Out- Right Out+ 3.7. Power On/Off connector Pin Definition Definition +5V Standby +5V Status Power On# ZK810 Series User Manual...
LCD Surface Cleaning 1. How to clean the LCD surface properly? Do not spray any liquids on the LCD screen directly, and do not use paper towels, this can cause the LCD screen to become scratched. Always apply the solution to your cloth first, not directly to the parts you are cleaning. You want to avoid dripping the solution directly into your computer or laptop.
Page 17
CE Notice This device complies with the requirements of the CE directive.’ FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the ZKBio810 Series and is the answer not in the manual?
Questions and answers