Page 3
ZKX-AI1000 User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors.
Page 4
User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
User Manual Overview ZKX-AI1000 is a smart and adaptable algorithms terminal for the automatic detection of dangerous, prohibited and contraband goods and substances, helping to reduce the burden on image analysts and improve detection/screening outcomes. ZKTeco has a huge image database, through continuous training algorithm, to improve the accuracy and credibility of the algorithm and services to ZKTeco X-ray inspection system.
User Manual Installation The ZKX-AI1000 is easy to install, and this manual uses the installation process for the X-ray ZKX5030C as an example. Note: Before installation, the X-ray must be disconnected from the power supply, it is strictly prohibited to operate any device with electricity during this process.
WebServer and servers, etc. Login Power on the ZKX-AI1000, connect the network cable, then log in to the WebServer by entering the provided address in a browser. Use the default account (admin) and password (123456) to log in to the WebServer.
After a successful login, modify the ZKX-AI1000's IP address, gateway address, and other relevant information based on your requirements., Click [Save] to confirm the changes. Once the IP address is successfully updated, the ZKX-AI1000 will disconnect from the WebServer. To log in again, enter the new IP address.
Page 18
Click [Time Settings] to set the time of the ZKX-AI1000. User Management Click [User Management] to add and edit managers of the ZKX-AI1000. Firmware Upgrade Click [Firmware Upgrade] to upgrade the firmware of the ZKX-AI1000. Note: For file upgrades, please contact our technical support. Firmware upgrades are not recommended under normal circumstances.
Need help?
Do you have a question about the ZKX-AI1000 and is the answer not in the manual?
Questions and answers