Orienting The Sensor - Emerson Micro Motion F Series Installation Manual

Orienting the Sensor

Step 2 Orienting the Sensor
The sensor will function properly in any orientation if the sensor tubes remain filled with process fluid.
Micro Motion recommends orienting F-Series sensors as shown in Figure 9.
Figure 9 Recommended sensor orientations
Slurries and
Gases Liquids self-draining applications
Tubes up Tubes down
Flag mount
Horizontal pipeline Horizontal pipeline
Vertical pipeline
Flow
Flow direction arrow
The sensor has a flow direction arrow (see Figures 1–7) to help you configure the transmitter for flow
direction. If possible, install the sensor so that the flow direction arrow matches actual process flow.
Vertical pipeline
If the sensor is installed in a vertical pipeline, liquids and slurries should flow upward through the sensor.
Gases may flow upward or downward.
14 Sensor Installation: F-Series