Camera Special Commands - Canon ELURA10 A Service Manual

5-3 Camera Special Commands

<Generals>
(1) The camera special commands are available for operation check.
(2) Referring to the table shown below, make preparation, and then use any camera special commands as required.
(3) All the settings are reset when the STORE key is pressed in the "WR"mode at a relevant item.
Also, all commands are reset by turning the power off and on again.
ST EP PROCEDURE
CAM SPECIAL COMMAND
Preparation 1) Make setting shown at right.
2) Press the ST ORE key.
WB SET 1) Make setting shown at right.
2) Press the ST ORE key.
WB LOCK 1) Make setting shown at right.
2) Press the ST ORE key.
WB T URBO 1) Make setting shown at right.
2) Press the ST ORE key.
WB 1) Make setting shown at right.
OUT DOOR 2) Press the ST ORE key.
WB INDOOR 1) Make setting shown at right.
2) Press the ST ORE key.
IRIS OPEN 1) Make setting shown at right.
2) Press the ST ORE key.
IRIS CLOSE 1) Make setting shown at right.
2) Press the ST ORE key.
AGC MAX 1) Make setting shown at right.
2) Press the ST ORE key.
AGC MIN 1) Make setting shown at right.
2) Press the ST ORE key.
COLOR BAR 1) Make setting shown at right.
2) Press the ST ORE key.
White 100% 1) Make setting shown at right.
(DIC) 2) Press the ST ORE key.
White 50% 1) Make setting shown at right.
(DIC) 2) Press the ST ORE key.
White, arbitrary 1) Make setting shown at right.
(DIC) 2) Press the ST ORE key.
White 100% 1) Make setting shown at right.
(FIC) 2) Press the ST ORE key.
White 50% 1) Make setting shown at right.
(FIC) 2) Press the ST ORE key.
White, arbitrary 1) Make setting shown at right.
(FIC) 2) Press the ST ORE key.
CAHPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS
MONIT OR
PG BK MD ADDR DT
5 3 WR **00 33
↑ ↑ ↑ ↑
RD
5 2 WR 3300 --
↑ ↑ ↑
RD --
5 2 WR 3301 --
↑ ↑ ↑
RD --
5 2 WR 3302 --
↑ ↑ ↑
RD --
5 2 WR 3303 --
↑ ↑ ↑
RD --
5 2 WR 3304 --
↑ ↑ ↑
RD --
5 2 WR 3305 --
↑ ↑ ↑
RD --
5 2 WR 3306 --
↑ ↑ ↑
RD --
5 2 WR 3307 --
↑ ↑ ↑
RD --
5 2 WR 3308 --
↑ ↑ ↑
RD --
5 2 WR 3309 --
↑ ↑ ↑
RD --
5 2 WR 330A --
↑ ↑ ↑
RD --
5 2 WR 330B --
↑ ↑ ↑
RD --
5 2 WR 330C --
↑ ↑ ↑
RD --
5 2 WR 330D --
↑ ↑ ↑
RD --
5 2 WR 330E --
↑ ↑ ↑
RD --
5 2 WR 330F --
↑ ↑ ↑
RD --
3-7
ELURA20 MC A, ELURA10 A
Microcomputer operation
ST
WAIT
OK Completion of high address "33" setting
WAIT
OK WB is set.
WAIT
OK WB is locked.
WAIT
OK WB high-speed setting mode
WAIT
OK Outdoor white balance mode
WAIT
OK Indoor white balance mode
WAIT
OK T he iris is opened forcibly.
WAIT
OK T he iris is closed forcibly.
WAIT
OK A value of AGC gain is maximized.
WAIT
OK A value of AGC gain is minimized.
WAIT Output a color bar signal for DIC output.
OK
WAIT Output a white 100% signal for FIC output.
OK
WAIT Output a white 50% signal for DIC output.
OK
WAIT
OK DIC output, white
(By charging the DT of
"PG : 5, BK : 0, AD : 2822",
the brightness can be changed arbitrary.
WAIT Output a white 100% signal for FIC output.
OK
WAIT Output a white 50% signal for FIC output.
OK
WAIT
OK FIC output, white
(By charging the DT of
"PG : 5, BK : 0, AD : 2822",
the brightness can be changed arbitrary.