Av Insert; Tape Usable For Av Insert; Av Insert Operation; Multi-Dial - Canon ELURA10 A Service Manual

7-13 AV Insert

In the AV insert mode, the audio, video and sub-code areas are overwritten, but not the ITI (Insert and Track Information) area.

7-13-1 Tape Usable for AV Insert

Only tape recorded in the SP mode can be used for AV insert. If an attempt is made to use any other tape, the Stop mode will be
activated.
If the LP mode, an unrecorded section or SDL mode is detected, operation will also stop (warning display).

7-13-2 AV Insert Operation

(1) In the VCR mode, position and pause the tape to be used for AV insert, then press the AV Insert key of the remote control.
The AV Insert mode will be activated (AV Insert Pause) and G (AV Insert Pause) will appear on the LCD panel (CVF).
(2) Press the Pause key and input the video and audio.
AV insert will start. G (AV Insert) will appear on the LCD panel (CVF).
(3) Press the Stop [I] key to stop.
The AV Insert mode will be canceled, the AV Insert display will disappear and operation will stop.
• If the Pause [I] key is pressed instead of the Stop
will return.
* AV Insert can also be canceled by pressing the AV Insert key of the remote control during AV Insert Pause.
* Also, if the Zero Set Memory key of the remote control is pressed at the tape position where AV insert is to be ended, operation will
automatically stop and AV insert will be canceled when that position is reached after operation (2).

7-14 Multi-Dial

VCR operation and various settings are performed in accordance with the body mode.
Dial Rotation
Body mode
Using the menu
LCD Brightness adjustment
Menu
Card mix level adjustment
EXP lock
Manual focus
VCR mode :
Pushing the Dial
Body mode
Photo pause
Digital effect
Menu
CHAPTER 1. GENERAL DESCRIPTION OF PRODUCT
key, the AV Insert mode will not be canceled and status (1) (AV Insert pause)
Operational function
Item selection
Brightness adjustment
Mix level adjustment
EXP compensation
Focus adjustment
Speaker volume adjustment
Operational function
Program AE,AE menu open/close
(selection confirmation)
Digital effect mode selection switch
Menu setting item switch
1-50
ELURA20 MC A, ELURA10 A
Rotating the dial upward
The cursor moves upward
The LCD screen becomes brighter
The mix level range narrows
The aperture opens
Focus shifts to close-up
The volume increases
Dial push
Program AE mode selection
Digital effect mode is selected.
An item is selected.