Manually Defining A Hard Disk - DEC Digital PC 3500 System Reference Manual

Using the BIOS Setup Utility

Manually Defining a Hard Disk

If your hard disk was not recognized correctly by the Autotype mode in the BIOS
Setup utility, or you wish to change your hard disk's definition, you can manually
define your hard disk drive as follows:
1. Reboot the computer and enter Setup.
2. Highlight the "Main" menu.
3. Select an "IDE Adapter" field to assign the new hard disk and press [Enter].
4. Fill-in the parameters of the hard disk in the appropriate fields.
5. Press [Esc] once and verify that the selected IDE Adapter field reads
correctly for your hard disk. For example: IDE Adapter 0 Master
(C: 835 MB).
6. Press [Esc], then [Enter] twice to exit the BIOS Setup utility and to reboot the
computer so changes immediately take affect.
2-16