Beyond Quick Setup
Attaching the Hasp (Short Tower Computers)
To attach the hasp:
1. Insert the hasp tab, with the lock/cable hole, through the slot in the rear
panel.
2. Slide the foot of the hasp behind the rear panel tongue and seat the foot
securely.
3. Replace the outside cover, carefully sliding the left, rear-edge slot over the
hasp.
4. Connect the power cord to your computer and to the wall outlet.
5. Turn on your computer and then turn on all external devices.
Figure 1-8. Attaching the Hasp (Short Tower Computers)
1-16
DEC00881