Maintenance; Device Storage - CU Medical Systems i-PAD CU-SP1 AUTO Instructions For Use Manual

6. Maintenance

6.1 Device Storage

Please refer to the precautions below when storing the Device in order to avoid device damage.
PROHIBITION
Do not operate or store the device in conditions that are beyond the following. specified
limits.
• Storage Conditions
The device is stored together with the defibrillator pads and the battery pack is inserted
- ready to be used in an emergency
Temperature: 0℃ ~ 43℃ (32℉ ~ 109℉)
Humidity: 5% ~ 95% (non condensing)
• Transport Environment
device only, no defibrillator pads and battery pack included
Temperature: -20℃ ~ 60℃ (-4℉ ~ 140℉)
Humidity: 5% ~ 95% (a location with no condensation)
 Do not store the device in areas that are directly exposed to sunlight
 Do not store the device in areas with highly fluctuating temperatures
 Do not store the device near heating equipment
 Do not store the device in areas where there is high vibration (in excess of
Road Transportation and Helicopter Minimum Integrity of MIL-STD-810G Method 514.5C)
 Do not operate or store the device in environments with high concentration of flammable
gas or anesthetics.
 Do not operate or store the device in areas with high concentration of dust
 Only personnel authorized by the manufacturer may open the device for servicing. There
are no user serviceable components inside the device.
WARNING
No modification of this equipment is allowed
34