CU Medical Systems i-PAD CU-SP1 AUTO Instructions For Use Manual page 30

③ The device gives the you a summary (the total hours of the last device use and the number
of defibrillation shocks delivered).
④ The voice guide gives the S/W version of the device.
⑤ When instructed to transfer the treatment history, press the i-Button to transfer the data.
If there is treatment data in the device's internal memory:
① The voice guide reports the total number of individual treatment data recorded in the device.
② By default, of a maximum of 5 individual treatment data, the first on the list is the most recent.
③ Press the i-Button shortly to change the transfer order of the treatment data as follows:
No.1 treatment data  No.2 treatment data  No.3 treatment data  No.4 treatment data
 No.5 treatment data
④ If you wish to transfer the selected treatment data, press down the i-Button for more than 2
seconds.
⑤ Run CU Expert on the PC. Refer to the CU Expert manual for detailed information regarding
how to receive data.
⑥ The device will be connected with the CU Expert within a few seconds, and data will be
automatically transferred.
When copying is completed, the mode changes to CPR guide setting mode. Refer to [Section
5.3: Device Setting] for details regarding changing CPR guide setting.
If there is no treatment data in the device's internal memory:
The device mode changes to CPR guide setting mode after informing you that no treatment
data exists.
CAUTION
 The distance between the IrDA port on the device and the IrDA adapter should be within 30
cm, while their angle should be within ±15°. Also, since external light source affects the IrDA,
try to use it in indoors and away from fluorescent and/or incandescent lamps.
30