CU Medical Systems i-PAD CU-SP1 AUTO Instructions For Use Manual page 32

⑥ The voice guide will give information regarding the current CPR guide setting.
⑦ Press the i-Button to change the setting, or wait for 3 seconds to go to the next step.
(When the setting is completed, the i-Button flashes twice in blue.)
⑧ Settings can then be changed in the following order: Number of Chest Compressions,
Number of Ventilation, Chest Compression rate, Pausing Time, and Detailed Guide
Selection. Refer to [Table 1] CPR Guide Setting Options below.
⑨ When the setting is completed, the voice guide will give information regarding the set CPR
guide, which may be saved or canceled.
⑩ Press the i-Button to save or the Power Button to cancel by following the voice instructions.
⑪ When the CPR guide setting is either saved or canceled, the device automatically shuts
down.
[Table 1] CPR Guide Setting Options
Setting
Number
Option
Number of
1 Chest
Compression
Number of
2
Ventilation
Number of
3
Cycles
Chest
4 Compression
Rate
CPR Pause
5
time
Detailed
6 Guide
Selection
Range Unit
15, 30 15
0 to 2 1
2 to 10 1
100 to
5
120
30 to
30 sec. 120 sec.
180 sec.
On/Off
32
Default
Perform 30 compressions.
30
Give 2 breaths.
2
Perform 5 cycles of chest
5
compression and ventilation.
Compress the chest at a rate of
100 100 compressions per minute.
Pause for 120 seconds
(2 minutes).
Turns ON or OFF detailed voice
instructions for the chest
Off
compression and ventilation when
performing CPR.
Description