SAMWONTECH
3.4 FIX and PROGRAM Operation
3.4.1 FIX AND PROGRAM STOP screen
▶ CH1, CH2 operation type can be selected as "FIX" and "PATTERN" each at [4. FUNCTION & FIX
OPERATION].
▶ [Figure 3-22] is "Asynch" selected screen at [4. FUNCTION & FIX OPERATION].
▶ [Figure 3-23] is "Synch" selected screen at [4. FUNCTION & FIX OPERATION].
▶ Refer to [5.1 PROGRAM PATTERN SET] for Pattern Set method.
▶ Press
(RUN) button at bottom right side from [Figure 3-22 FIX AND PROGRAM STOP screen] will
transfer the screen to [Figure 3-28 The 1
[Figure 3-22] The 1
[Figure 3-23] The 1
1st Edition of TEMP2020_Series IM : Dec. 15. 2008
st
FIX AND PROGRAM RUN screen].
st
FIX AND PROGRAM STOP screen (Asynch)
st
FIX AND PROGRAM STOP screen (Synch)
Page 23 / 71