Reserve Operation Setting - Samwontech TEMP2020 series Operation Manual

SAMWONTECH

8 RESERVE OPERATION setting

▶ Press [RESERVE SET] on MAIN MENU screen to enter into this time setting section.
▶ This screen is to adjust the current time and set the time for RESERVE Operation.
▶ Following screen explains for CH1, and it operates same with CH2 screen
①
②
① Setup box to adjust the current year, month, date and time.
☞ The time cannot be changed when the measured values are being recorded.
② Setup box for the starting time of RESERVE Operation.
③ Move to CH1 or CH2 screen.
④ Button to activate RESEVER Operation based on RESEVE TIME setting.
☞ The (RESERVE) button will be active to
Operation will display on the Operation screen same as [Figure 8-2 PROG Operation screen on
RESERVE].
1st Edition of TEMP2020_Series IM : Dec. 15. 2008
[Figure 8-1] RESERVE SET Screen
[Figure 8-2] PROG Operation screen on RESERVE (Asynch)
(RESERVE) and notice message for RESERVE
③
④
Page 66 / 71