Screen Display Setting - Samwontech TEMP2020 series Operation Manual

SAMWONTECH

7 SCREEN DISPLAY setting

7.1 Screen Display settings
▶ Press the DISPLAY SET on MAIN MENU screen to enter this display setting section.
▶ This screen is to set parameters concerned screen display such as character font, LED brightness,
Buzzer and Backlight off time.
①
②
③
④
① TEMP2520 provides 3 kind of PV font on Operation Screen. This is the checkbox for display PV font.
② Setup box for Backlight OFF time.
☞ Backlight OFF time starting from no Key input.
③ Adjustable LCD brightness by the
④ Sets rotation between CH1 and CH2 Display Screen.
☞ After set the screen rotation time and it "beep" 1 minute after without any screen touch at RUN
Screen-2, then it repeats rotation between CH1 and CH2 after setting time.
☞ All touch becomes Key Lock state when screen is rotating. Key Lock is released by touching any area
in the screen.
☞ It operates only at [The 2
⑤ Checkbox to set whether or not using BUZZER SOUND.
☞ Even if the buzzer has been turned off, it will sound in cases of DI error.
⑥ Set the Use/Unuse of User Tag.
⑦ Set the Tag Name for CH1 and CH2.
☞ Can input max. 6 characters, and setting Tag is displayed on the Operation Screen.
☞ Refer to [Figure 3-6]
1st Edition of TEMP2020_Series IM : Dec. 15. 2008
[Figure 7-1] DISPLAY SET Screen
, buttons.
nd
Fix, Program, Fix and Program Run Screen].
⑤
⑥
⑦
Page 62 / 71