Graph & Rec. Setting; Pattern Graph View - Samwontech TEMP2020 series Operation Manual

SAMWONTECH
6. GRAPH & REC. setting

6.1 PATTERN GRAPH VIEW

▶ This screen displays Operation Pattern and Progressing Time in Graph on Program Operation.
▶ Following screen explains for CH1, and it operates same with CH2 screen.
▶ Selecting [Graph & Store] at the top left of [Figure 3-1 Main Menu] will move the screen to [Figure 6-1
Graph & Storage Screen-1 (PATTERN GRAPH VIEW)].
▶ This screen displays input pattern from [Figure 5-2 PATTERN SET Screen] into Graph.
▶ Can change
②
[Figure 6-1] GRAPH & STORAGE Screen-1(Program Operation)
[Figure 6-2] GRAPH & STORAGE Screen-1 (Pattern Graph View)
① Button to activate Graph Setting Menu.
☞ Graph Setting Menu will popup at the bottom of the screen depending on ON/OFF state of GRP.SET
button.
② Setup box to input the pattern number to display by trend graph.
☞ Press the setup box
☞ Refer to [Figure 6-4 Pattern number input keypad for graph]
③ Time interval for X-axis can be adjusted as you want. This is the Setup box for time interval.
☞ Press the setup box
☞ This time interval can be adjusted even during processing operation.
1st Edition of TEMP2020_Series IM : Dec. 15. 2008
(Pattern No),
, and Input Keypad will popup on the screen.
, and Option Keypad will popup on the screen.
(View Time) during graph is in progressing.
①
③
④
⑤
⑥
Page 55 / 71