Program Setting - Samwontech TEMP2020 series Operation Manual

SAMWONTECH

5. PROGRAM setting

▶ Press [PROGRAM SET] on MAIN MENU screen to enter into program setting section [Figure 5-1
PROGRAM SET screen].
▶ This PROGRAM SET menu is composed with 6 groups concerned program operation setting.
①
②
④
No. Instructions
① PATTERN SET
② REPEAT SET
③ FILE EDIT
④ TIME SIGNAL
⑤ WAIT SET
⑥ PATTERN NAME
1st Edition of TEMP2020_Series IM : Dec. 15. 2008
[Figure 5-1] PROGRAM SET Screen
Pattern / Segment setting group.
Pattern / Segment repeat operation setting group
Pattern editing by copy and delete.
TIME SIGNAL setting group
Group to set WAIT function settings
Group to input the name of each pattern.
Description
③
⑤
⑥
Page 37 / 71