Figure 2-21 Flow Diagram For Receiving With End Criterion "Expiration Of Character Delay Time - Siemens Simatic S7-300 CP 341 User Manual

End criterion "Expiration of character delay time"
When data is received, the end of the message frame is recognized when the character
delay time expires. The received data is accepted by the CPU.
In this case the character delay time must be set such that it is certain to expire between two
consecutive message frames. But it should be so long that the end of the message frame is
falsely identified in the case of a send pause of the link within a message frame.
The figure below illustrates a receive operation with the end criterion "Expiration of character
delay time".
Figure 2-21
CP 341 Point-to-Point Communication, Installation and Parameter Assignment
Manual, 09/2008, A5E02191071-01
www.gkbpx.com
Flow diagram for receiving with end criterion "Expiration of character delay time"
Basic Principles of Serial Data Transmission
2.6 Data Transmission with the ASCII Driver
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
65