Charging The Battery With The Ac Adapter - HP iPAQ hx2000 Additional Information

Charging the Battery
There are several ways to charge the battery on your HP iPAQ including:
• AC Adapter
• Optional Automobile Adapter
• HP Desktop Cradle and AC Adapter
• HP Desktop Cradle and USB Cradle

Charging the Battery with the AC Adapter

The standard AC Adapter works in a standard electrical outlet. You can
also charge your HP iPAQ in your automobile with an optional
Automobile Adapter that works in your vehicle's electrical cigarette lighter
or a 12-volt power outlet.
To purchase an optional Automobile Adapter, refer to the HP Web site at:
www.hp.com/go/ipaqaccessories.
CAUTION: Use only HP recommended AC adapters.
To charge your HP iPAQ using the AC Adapter:
1. Insert the AC Adapter plug into the AC Charger adapter.
2. Plug the AC Adapter into an electrical outlet.
3. Insert the AC Charger adapter into the bottom of the Pocket PC.
CAUTION: To avoid damaging your HP iPAQ or the AC Adapter, check
to be sure all connectors are properly aligned before connecting them.
4. When the Power button indicator on the front of the HP iPAQ turns
solid amber, the device is fully charged and you can disconnect
the AC Adapter. The approximate time to fully charge a drained
battery is four hours.
NOTE: A standard battery can be charged in about four hours; an
optional extended battery takes longer.
Continued
1