Intel® Virtual Raid On Cpu - TYAN TN200-B7108 Service Engineer's Manual

5.3.2 Intel® Virtual RAID on CPU
Please follow the instructions to initiate the Intel Virtual RAID on CPU function.
Step 1.
Select Socket Configuration  IIO Configuration  Intel® VMD technology 
Intel® VMD for Volume Management Device on Socket 0 (for CPU0) / Socket 1
(for CPU1)  Intel® VMD for Volume Management Device for PStack0 (Slot 1~4)
/ PStack1 (Slot 5~8) / PStack2 (Slot 9~12)
Step 2.
Suppose the card is installed in CPU0 Slot 3, then Intel® VMD for Volume
Management Device for PStack0 will be set to [Enabled].
Step 3.
Save changes and reboot.
All Intel VMD Controllers
Select to see more information about the Intel VMD Controllers.
98
http://www.tyan.com