3Selecting The Site Of Installation - Canon Finisher-R1 Installation Procedure

Chapter 1
[3]
[1]
[4]
[2]
F-1-2
Before installing an accessory, be sure to go through the following on the host machine in the order indicated:
1.Turn off the host machine's control panel power switch.
2.Turn off the host machine's main power switch.
3.Disconnect the host machine's power plug (from the power outlet).
1.1.3 Selecting the Site of Installation
0003-1758
Select the site of installation, making sure that there will be enough space for work (e.g., handling paper). Be sure
also that there will be no gap between the finisher and its host machine.
<Finisher-R1>
4