Canon Finisher-R1 Installation Procedure page 18

Chapter 1
10) In the case of the Finisher-R1, close the front door. In the case of the Saddle Finisher-R2, go to the next step
while keeping the front cover open.
■ Removing the Stitcher Fixing Member (only for the Saddle Finisher-R2)
1) Slide out the stitcher unit [1] to the front, and remove the tape.
2) Remove the screw [1], and remove the stitcher fixing member [2].
3) Put the stitcher back in and close the front cover.
■ Removing the Folding Roller Releasing Plate (only for the Saddle Finisher-R2)
Memo: The releasing plate must be mounted to prevent roller deformation, as otherwise occurring when the machine
10
[1]
F-1-13
[1]
[2]
F-1-14