LPR Setting
F-3-79
3.2.12 Remedy for Faults Caused by the Environment (30 client PCs or
more)
If SMB connection fails or takes about 30 min, go through the following
start>Control
Panel>Printers
icon>Prosperities>Ports(tab)>Standard>(select[Standard TCP/IP Port]by putting a check mark in the check
box>Configure Port(deselect by removing the check mark from[SNMP Status Enabled]>OK(click).
and
Other
Hardware>Printers
and
Faxes>(right
click
Chapter 3
0005-3106
the
printer
3-47
Need help?
Do you have a question about the Color Network Multi-PDL Printer Kit-C1 and is the answer not in the manual?
Questions and answers