Canon Color Network Multi-PDL Printer Kit-C1 Service Manual page 133

2) Use the IP address when setting up the network connection on the PC later.
Check the Settings Made on the iR C6800 by Printing a User Data List
- make the following selections: Ad Func>Report Settings>Network>User's Data List>Yes
- see that a user data list (network) has been printed.
Note:
You can also check the IP address using the printed data list.
If no IP address has been set, set it on the control panel, and click [OK].
After making the selections, turn off the power, turn off the main power, and then turn on the main power.
3) Obtain the RAW setting of the printer:
1. turn on the power.
2. click [Ad Func].
3. click [System Settings].
4. click [Network Settings].
5. click [TCP/IP Settings].
6. click Downward arrow button.
7. click [RAW Settings].
8. check to see that the notation is [On].
(After making the check, click [Cancel] to end.)
Checking and Setting RAW
F-3-163
- If the notation of [RAW Settings] was [Off], click [On] then [OK] to change the setting.
Chapter 3
3-97