Canon Color Network Multi-PDL Printer Kit-C1 Service Manual page 73

3) Select [Canon LPR 2.0]; then, click [New Port].
F-3-62
4) Check to see that [Protocol] indicates "LPR" [LPR Queue Name] is automatically filled with "lp." Enter the value
you see for the iR C6800 (or colleted as information) for [IP address or Host Name].
Note:
If you directly typed for [IP address or Host Name], click [OK] after dong so; then, go to step 5).
F-3-63
Reference:
At this point, you may obtain information from the device automatically and indicate the IP address by clicking
[Browse] without directly typing in [IP Address]; to do so, go through the following:
1. Click [Browse].
Chapter 3
3-37