Canon Color Network Multi-PDL Printer Kit-C1 Service Manual page 180

Chapter 3
F-3-242
2) Take note of the IP address. You will be using it later when making network settings on the PC.
- Checking the Settings of the iR C6800
Ad Func>Report Settings>Network>User's Data List>Yes
see that a user data list (network) has been printed.
Note:
The IP address may also be checked on the printed user data list
- If no IP address has been set, set it, and click [OK] on the control panel.
- There after, turn off the power, turn off the main power, and turn on the main power.
3) Check the LPD settings of the printer:
1. turn on the power.
2. click [Ad Func].
3. click [System Settings].
4. click [Network Settings].
5. click [TCP/IP Settings].
6. click Downward arrow button .
7. click [LPD Settings].
8. check to see that the notation is [On].
- if the notation is [On], click [Cancel] to end the operation.
- if the notation is [Off], on the other hand, click [On] and then [OK], while leaving [LPD Banner page] as it is.
3-144