Canon Color Network Multi-PDL Printer Kit-C1 Service Manual page 52

Chapter 3
- If there is a fault in the network connection, go to step 15). (The screen will appear in response to the presence
of a fault.)
F-3-23
15) If the above screen appears while setting up the standard TCP/IP port,
Make checks according to the instructions on the screen:
- check the connection of the cable (on the side of the iR C6800and PC).
- check to see that the device is on.
- check to see if that IP address is correct.
Note:
In the case of the iR C6800, connection to the network is made in about 1 min.
3-16