Function Test <(6) Function Test - Canon iR1018 Series Portable Manual

Chapter 5
5.1.13.5 FUNCTION TEST <(6) FUNCTION TEST>
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Function test ((6) FUNCTION TEST)
Press the numeric keypad key 6 on the test mode menu to select the function test.
Press numeric keypad keys 1 and 3 to 9 during the function test to enter the menus listed below.
Keypad
1
2
3
4
5
6
7
8
9
G3 signal transmission test (6-1: G3 480 bps Tx)
Press numeric keypad key 1 on the FUNCTION TEST menu to select the G3 signal transmission test. This test transmits 4800-bps G3 signals from the telephone
line connection terminal and speaker.
Sensor test (6-3: SENSOR)
This mode is used to verify the status of the unit sensors from LCD indications. Press numeric keypad key 3 on the FUNCTION TEST menu to select the sensor
test. LCD indications change as the associated sensors turn on and off.
48
Left/right arrow key Transmission speed
4800bps
7200bps
9600bps
< 12000bps
14400bps
16800bps
19200bps
21600bps
> 24000bps
26400bps
28800bps
31200bps
33600bps
Item
G3 signal transmission test
Not used
Sensor test
ADF test
Book test
Speaker test
Operation panel test
Lamp test
Line signal reception test
T-5-24
Explanation
Transmits 4800-bps G3 signals to a telephone line and
speaker.
Sensor actuation test
ADF operation test
Host machine operation test
Speaker operation test
LCD, LED and control key operation test
Contact sensor illumination test
NCU board signal sensor and frequency counter operation test
0013-1426