Canon iR1018 Series Portable Manual page 26

Chapter 4
Additional Functions
6. CHECKING THE LOG
7. USE DEVICE USB
Additional Functions
1. SYS. MANAGER INFO
2. DEVICE INFO
3. MANAGE DEPT. ID
4. MANAGE USER ID
5. NETWORK SETTINGS
6. COMMUNICATIONS
7. REMOTE UI
8. ACCESS TO DEST.
9. CHECKING THE LOG
10. USE DEVICE USB
*: indicates factory settings.
16
Available Settings
ON, OFF(*)
OFF, ON(*)
Available Settings
SYS. MANAGER ID, SYSTEM PASSWORD, SYSTEM MANAGER
DEVICE NAME, LOCATION
OFF(*), ON; REGISTER DEPT. ID (PASSWORD, PAGE LIMIT SET., ERASE),
PAGE TOTALS (VIEW PAGE TOTALS, CLEAR ALL TOTAL, PRINT LIST),
PDL JOBS W/OUT ID (ON(*), OFF)
OFF(*), ON
TCP/IP SETTINGS: IP ADDRESS AUTO. (OFF(*), ON; DHCP, BOOTP,
RARP), IP ADDRESS, SUBNET MASK, GATEWAY ADDRESS, DNS
SETTINGS (PRIMARY SERVER, SECONDARY SERVER, HOST NAME,
DOMAIN NAME, DNS DYNA. UPDATE), CINFIGURE WINS (WINS
RESOKUTION, WINS SERVER), USE LPD (ON(*), OFF), RAW SETTINGS
(ON(*); USE BIDIRECTIONAL, OFF),USE PASV MODE (OFF, ON), FTP
EXTENSION (OFF, ON), USE HTTP (ON(*), OFF), PORT NO., SET IP ADD
RANGE (OFF(*), ON), RX MAC ADD SET. (OFF(*), ON)
SMB SETTINGS: USE SMB CLIENT (OFF, ON; SERVER, WORKGROUP,
COMMENT, LM ANNOUNCE)
SNMP SETTINGS: USE SNMP (ON(*), OFF), COMMUNITY NAME 1,
COMMUNITY NAME 2, SNMP WRITABLE 1 (ON(*), OFF), SNMP
WRITABLE 2 (ON, OFF(*))
DEDICATED PORT: ON(*), OFF
ETHERNET DRIVER: AUTO DETECT (AUTO(*), MANUAL; DUPLEX
(HALF DUPLEX(*), FULL DUPLEX), ETHERNET TYPE (10 BASE-T(*), 100
BASE-TX)
VIEW IP ADDRESS: IP ADDRESS, SUBNET MASK, GATEWAY ADDRESS
E-MAIL/I-FAX: SMTP RX (OFF, ON), SMTP SERVER, POP (OFF, ON), POP
BEFORE SEND (OFF,ON), E-MAIL ADDRESS, POP SREVER, POP
ADDRESS, POP PASSWORD, POP INTERVAl
STARTUP TIME SET.: 0(*) to 300 SEC.
E-MAIL/I-FAX: MAX TX DATA SIZE, DIVIDED OVER MAX
FAX SETTINGS: TX START SPEED (2400 to 33600(*) bps), RX START
SPEED (2400 to 33600(*) bps)
MEMORY LOCK: OFF(*), ON (PASSWORD, REPORT PRINT, MEMORY RX
TIME)
ON(*), OFF
RESTRICT NEW ADD. : OFF(*), ON
FAX DRIVER TX: OFF(*), ON
ON(*), OFF
OFF(*), ON