Sssw-Sw30; Sssw-Sw34 - Canon iR1018 Series Portable Manual

5.1.1.9.3 Detailed Discussions of Bit 1
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Select whether to use the V.8 protocol when called. If NO is selected, the V8 protocol is inhibited when called and the V.21 protocol is used.
5.1.1.9.4 Detailed Discussions of Bit 2
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
If ANSam signal is not received during transmission, select whether to use the V.8 protocol when the other fax machine declares the V.8 protocol in DIS signal. If
NO is selected, the CI signal is not transmitted and the V.8 protocol is not used even if the DIS that specifies the V.8 protocol is received.
The V.8 late start is not executed during manual transmission regardless of this setting.
5.1.1.9.5 Detailed Discussions of Bit 3
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Select whether to declare the V.8 protocol in DIS signal for reception. If NO is selected, the V.8 protocol cannot be used because it is not declared in DIS signal.
The V.8 late start is not executed during manual reception regardless of this setting.
5.1.1.9.6 Detailed Discussions of Bit 4
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Select whether the receiver falls back during V.34 reception. If 'Prohibit' is selected, the receiver does not fall back.
5.1.1.9.7 Detailed Discussions of Bit 5
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Select whether the transmitter falls beck during V.34 transmission. If 'Prohibit' is selected, teh transmitter does not fall back.

5.1.1.10 SSSW-SW30

5.1.1.10.1 List of Functions
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Bit
0
1
2
3
4
5
6
7
5.1.1.10.2 Detailed Discussions of Bit 5
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
When "Detect with the new method" is selected, tone is detected for 3.5 seconds before call origination in order to discriminate between dial tone and voice. If dial
tone is detected and the time since line seizure is 3.5 seconds or longer, call origination takes place immediately. If the time since line seizure is less than 3.5 seconds,
call origination takes place after waiting for 1 second. (If the time since line seizure reaches 3.5 seconds during the 1-second waiting period, call origination takes
place immediately. By default, "Detect with a new method" is assigned for this SW.

5.1.1.11 SSSW-SW34

5.1.1.11.1 List of Functions
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
Bit
0
1
2
3
4
5
6
Function
Not used
Not used
Not used
Not used
Not used
New dial tone detection method
Not used
Not used
Function
Display the waste toner full
warning
Switch the waste toner full
warning
Not used
Not used
Not used
Not used
Not used
T-5-12
1
-
-
-
-
-
Detect with the new
method.
-
-
T-5-13
1 0
YES NO
Drum replacement required E019 displayed on an service
message displayed on an call
operator call
- -
- -
- -
- -
- -
0
-
-
-
-
-
Detect with the
existing method.
-
-
Chapter 5
0013-1326
0013-1327
0013-1328
0013-1329
0013-1330
0013-1331
0013-1332
0013-7930
23