Connecting Cables - YASKAWA JANCD-YEW01-E Instructions Manual

Interface Board for Welding
Power Supply
4.4
CN114
4 Board Installation

4.4 Connecting Cables

Connecting Cables
1. Connect the 24 VDC power cable to CN324 of the JANCD-YEW01-E
board.
2. Connect the I/O communication cable to CN320 of the
JANCD-YEW01-E board.
Connect the terminal connector which is connected to CN114 of the
JZNCD-YIF01-2E board to the unoccupied side of CN320 of the
JANCD-YEW01-E board.
3. Connect the cable for welding power source to CN322 of the
JANCD-YEW01-E board.
CN304
24VDC Power Cable
HB1370717-1
I/O Communications Cable
HB1370660-N-2
4-4
JANCD-
YEW01-E
REV.
CN324
F1,F2:
1A/250V
Cable for
Welding Power Source
CN322
Terminal Connector
CBL-YRC020-1
CN320
HW1481264
167646-1CD
20 of 40