Connector For Welding Power Source (Cn322); Starting Point Detection Output Connector (Cn321) - YASKAWA JANCD-YEW01-E Instructions Manual

Interface Board for Welding
Power Supply
2.3
Details of connector (view from the fitting surface of the cable connector)
1
13
23
Connector type: MR-34MG (soldering type) See Note 1.
Note 1: Use either MR-34MG or MRP-34M01.
Note 2: When using MRP-34M01, use either MRP-M103 or MRP-F113.
Note 3: Cable connector is not attached. Must be prepared by user.
2.4
Details of connector (view from the fitting surface of the cable connector)
Connector type: 231-105/037-000 See Note 1.
Note 1: Cable connector is attached to the board.
2 Hardware Specifications

2.3 Connector for Welding Power Source (CN322)

Connector for Welding Power Source (CN322)
MRP-34M01 (crimping type insulator) See Note 1.
MRP-M103 (crimping type contact, strip form terminal) See Note 2.
MRP-M113 (crimping tyep contact, loose piece terminal) See Note 2.
MR-34L+ (vertical type case)
All manufactured by Honda Tsushin Kogyo Co., Ltd.

Starting Point Detection Output Connector (CN321)

1
5
All manufactured by WAGO Company of Japan,Ltd.
2-2
12
22
34
HW1481264
167646-1CD
14 of 40