Makita HM1317C Instruction Manual
Electric breaker
Hide thumbs
Also See for HM1317C:
- Instruction manual (60 pages) ,
- Instruction mamual (45 pages) ,
- Technical information (19 pages)
Related Manuals for Makita HM1317C
Summary of Contents for Makita HM1317C
- Page 1 INSTRUCTION MANUAL Electric Breaker HM1317C HM1307C HM1317CB HM1307CB 010282 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on single-phase AC supply. They For Model HM1317C are double-insulated in accordance with European ENG102-2 Standard and can, therefore, also be used from sockets For European countries only without earth wire. -
Page 3: General Power Tool Safety Warnings
EC Declaration of Conformity Warnings Makita Corporation responsible manufacturer declare that the following Makita WARNING Read all safety warnings and all machine(s): instructions. Failure to follow the warnings and Designation of Machine: instructions may result in electric shock, fire and/or Electric Breaker serious injury. -
Page 4: Save All Warnings And Instructions For Future Reference
Save all warnings and as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions instructions for future reference. will reduce personal injuries. The term "power tool" in the warnings refers to your 13. Prevent unintentional starting. Ensure the mains-operated (corded) power tool or battery-operated switch is in the off-position before connecting (cordless) power tool. -
Page 5: Functional Description
24. Use the power tool, accessories and tool bits 12. Do not point the tool at any one in the area etc. in accordance with these instructions, when operating. The bit could fly out and taking into account the working conditions injure someone seriously. -
Page 6: Indicator Lamp
1. Set bolt 1350 2. Nut 1150 3. Side handle 010281 For model HM1317C,HM1317CB only NOTE: 010286 Blows at no load per minute becomes smaller than • those on load in order to reduce vibration under no The side handle can be swung 360° on the vertical and load, but this does not show trouble. -
Page 7: Operation
For Model HM1307CB,HM1317CB only (2) For bits without a collar 1. Bit with collar 2. Bit without collar 002928 This tool accepts bits either with or without a collar on its 1. Bit shank. 2. Tool retainer (1) For bits with a collar 3. -
Page 8: Maintenance
MAINTENANCE Then replenish with fresh grease (60g). Use only Makita genuine hammer grease (optional accessory). Filling with more than the specified amount of grease (approx. CAUTION: 60 g; 2 oz) can cause faulty hammering action or tool Always be sure that the tool is switched off and •... - Page 9 Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Bull point • Cold chisel • Scaling chisel •...
- Page 12 Makita Corporation Anjo, Aichi, Japan 884923B224...
Need help?
Do you have a question about the HM1317C and is the answer not in the manual?
Questions and answers