Com Port; Clear Cmos Button; Ps/2 Keyboard & Ps/2 Mouse Ports; Giga Lan Port - Shuttle FN25 User Manual

F
Back-Panel Connectors

COM Port

B1
This mainboard can accommodate one serial device on CN1.
Attach a serial device cable to the DB9 serial port CN1 at the back-panel of
your computer.

Clear CMOS Button

B2
This button is used to clear CMOS data. You can clear CMOS without opening
the chassis. It's a very friendly button.
PS/2 Keyboard & PS/2 Mouse Ports
B3
Two 6-pin female PS/2 keyboard & Mouse connectors are located at the rear
B4
panel of the mainboard. Depending on the computer housing you use (desk-
top or tower), the PS/2 Mouse port is situated at the top of the PS/2 Keyboard
port when the main-board is laid into a desktop, as opposed to a tower where
the PS/2 Mouse port is located at the right of the PS/2 Keyboard's. Plug the PS/
2 keyboard and mouse jacks into their corresponding ports.

Giga LAN Port

B5
This mainboard can accommodate one device on Giga LAN. Attach a CAT-5
cable to the Giga LAN port at the back-panel of your computer.
COM Port
Clear CMOS Button
PS/2 Mouse
PS/2 keyboard
Giga LAN Port
- 28 -