Table of Contents
Advertisement
6
USB1/USB2 Port Connectors
Two female connectors USB1/USB2 share
the same USB (Universal Serial Bus)
bracket at the rear panel of your
mainboard. Plug each USB device jack
into an available USB1/USB2 connector.
7
COM1 / COM2 Connector
This mainboard can accommodate two
serial device on COM1/COM2 .
Attach a serial device cable to the DB9
serial port COM1/COM2 at the back
panel of your computer.
8
Parallel Port Connector
One DB25 female parallel connector is
located at the rear panel of the mainboard.
Plug the connection cable from your par-
allel device (printer, scanner, etc.) into this
connector.
9
ATX Power On/Off Switch Connector (PON)
The Power On/Off Switch is a momen-
tary type switch used for turning on or off
the system's ATX power supply. Attach
the connector cable from the Power
Switch to the 2-pin PWON header on the
mainboard.
Note : Please notice the Speaker and all the LED connector is directional.
If your chassis's LED does not light during running, please simply
change to the opposite direction.
USB1 & USB2
- 29 -
COM2
COM1
Parallel Port
Advertisement
Table of Contents
