Manual Operation - Vemer Chronos RF Bianco User Manual

During manual operation the instrument performs as a normal thermostat, adjusting
on the basis of the Tm temperature (manual setpoint), independently from the day and
the time where it is.
The manual operation is signalled with the switch on of the symbol
To move from the automatic operation to the manual one:
1. press for a short time the key
flashes
2. set the desired setpoint with the keys
3. at this point on field (7) the value of the environment temperature reappears and
the instrument operates in manual.
If you want to change the setpoint (Tm) press the key
To go back to the automatic operation press for a long time the key
seconds).
Automatic
operation
CHRONOS RF Radiofrequency digital chronothermostat User Manual

MANUAL OPERATION

. In the field (7) the setpoint (Tm) currently set
and
Manual setpoint
(Tm) setting
3s
- 20 -
on field (5).
and confirm with the key
and repeat the points 2 and 3.
(about 3
Manual operation