Shuttle FB95 User Manual page 69

This item selects the alarm Time.
[hh] Ø Key in a DEC number: Min=0, Max=23.
[mm/ss] Ø Key in a DEC number: Min=0, Max=59.
*** Reload Global Timer Events ***
Global Timer (power management) events are I/O events whose occur-
rence can prevent the system from entering a power saving mode or
can awaken the system from such as a mode. In effect, the system
remains alert for anything that occurs to a device that is configured as
Enabled, even when the system is in a power-down mode.
Primary IDE 0/1
When these items are enabled, the system will restart the power-saving
time out counters when any activity is detected on any of the drives or
devices on the primary IDE channels.
Ø The choice: Disabled or Enabled.
FDD, COM, LPT Port
When this item is enabled, the system will restart the power-saving
timeout counters when any activity is detected on the floppy disk drive,
serial ports, or the parallel port.
Ø The choice: Disabled or Enabled.
PCI PIRQ [A-D] #
When this item is disabled, any PCI device set as the Master will not
power on the system.
Ø The choice: Disabled or Enabled.
PS2 Keyboard Power ON
This item allows you to set the PS2 Keyboard Power On function
Ø The choice: Disabled, Password, or Hot Key.
KB Power ON Password
This item allows you to set the KB Power On Password.
If "PS2 Keyboard Power ON" select "Password".
Ø Press" Enter" to set Password.
Hot Key Power On
This item allows you to set the Hot Key Power On. If "PS2 Keyboard
Power ON" select "Hot Key".
Ø The choice: Any Key, Ctrl-F1~Ctrl-F12.
- 65 -