Shuttle FB95 User Manual page 67

ACPI Function
This item allows you to enable/disable the Advanced Configuration and
Power Management (ACPI).
Ø Always "Enabled".
ACPI Suspend Type
This item allows you to select sleep state when suspend.
Ø The choice: S1(POS), S3(STR), or S1 & S3.
Run VGABIOS if S3 Resume(Auto)
This item allows the system to initialize the VGA BIOS from S3(Sus-
pend to RAM) sleep state.
Ø The choice: Auto, Yes or No.
Power Management
This item allows you to decide the timing to enter suspend mode.
Ø The choice: User Define, Min Saving, Max Saving.
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank This selection will cause the system to turn off
Blank Screen
DPMS
Ø The choice: V/H SYNC+Blank, Blank Screen, or DPMS.
Video Off In Suspend
This item determines the manner in which the monitor is blanked.
Ø The choice: Yes or No.
Suspend Type
This item allows you to select the Suspend Type.
Ø The choice: Stop Grant or PwrOn suspend.
MODEM Use IRQ
This determines the IRQ which the MODEM can use.
Ø The choice: 3, 4, 5, 7, 9, 10, 11, or NA.
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
This option only writes blanks to the video
buffer.
Initial display power management signaling.
- 63 -