Specifications; Hdc-P43; Optional Accessories/Related Equipment - Sony HDC-P43 Operation Manual

Specifications

HDC-P43

General
Power requirements 10.5 V to 17 V DC, 6.4 A (max.)
–20 °C to +45 °C (–4 °F to +113 °F)
Operating temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Storage temperature
Mass Approx. 2.0 kg (4 lb 6.6 oz) (Unit only)
Dimensions See page 48.
Imaging element
Imaging element 2/3-inch, 9.8 megapixel, CMOS image
sensor
Method 3-chip, RGB
Effective resolution 4K: 4096 (horizontal) × 2160 (vertical)
QFHD: 3840 (horizontal) × 2160
(vertical)
HD: 1920 (horizontal) × 1080 (vertical)
Electrical characteristics
Sensitivity F8.0 (at 2000 lx with 89.9% reflectance.
4K/59.94P or HD/59.94P (4×))
Image S/N HD/59.94i: 62 dB
Horizontal resolution 2000 TVL (4K: screen centered)
5% or higher modulation
Geometric distortion Negligible (not including lens distortion)
Optical system specifications
Spectral system F1.4 prism
Built-in filters Color temperature conversion filters
A: Cross filter
B: 3200K (clear)
C: 4300K
D: 6300K
–: –
ND filters
1: Clear
2: 1/4ND
3: 1/8ND
4: 1/16ND
5: 1/64ND
Input/output connectors
IN/OUT ST connectors for single-mode fiber
cables (2)
LENS 12-pin (1)
DC IN XLR 4-pin (1), 10.5 to 17 V DC
SDI 1, SDI 2 BNC-type (1 each)
PROMPTER OUT BNC-type (1), 1 Vp-p, 75 ohm
EXT I/O D-sub 15-pin, female (1)
USB USB 2.0 Type A 4-pin (1) (for connecting
USB drive)
NETWORK TRUNK RJ-45 type 8-pin (1)
Supplied accessories
Operation guide (1 set)
Operation manual (CD-ROM) (1)
Camera number label (1)
Design and specifications are subject to change without
notice.
Optional Accessories/Related
Equipment
Optional Accessories
Tripod Attachment
4K Upgrade Software
Related Equipment
BPU4000/4500 Baseband Processor Unit
HDCU2000-series, HDCU4300 HD Camera Control Unit
RCP-1000 series Remote Control Panel
MSU-1000 series Master Setup Unit
PWS-4400/4500 Multi Port AV Storage Unit
PWS-100PR1 Production Control Station
PWSK-4403 USB Control Device
HZC-CSM10 Camera System Management Software
CNA-1 Camera Control Network Adapter
Notes
• Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF THIS
UNIT, EITHER DURING THE WARRANTY PERIOD OR
AFTER EXPIRATION OF THE WARRANTY, OR FOR
ANY OTHER REASON WHATSOEVER.
• SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY
KIND MADE BY USERS OF THIS UNIT OR MADE BY
THIRD PARTIES.
• SONY WILL NOT BE LIABLE FOR THE TERMINATION
OR DISCONTINUATION OF ANY SERVICES RELATED
TO THIS UNIT THAT MAY RESULT DUE TO
CIRCUMSTANCES OF ANY KIND.
47
VCT-14
SZC-4001/4001M/4001W