Sony HDC-P43 Operation Manual page 37

PAINT
Page name Item
Page No.
<FLICKER REDUCTION
REDUCTION>
P18
POWER LINE
FREQUENCY
MODE
LIGHT TYPE
GAIN
OFFSET
LIMITER
ACM TYPE
<HDR OPERATION> HDR MODE
P19
SDR GAIN
HDR CONTRAST
BLACK HDR OFFSET
HDR KNEE
POINT
SLOPE
HDR WHITE CLIP
LEVEL
<OPTICAL FILTER> ND
P20
CC
Settings
ON, OFF
50, 60
STANDARD, ACM
1, 2, 3
–99 to +99, 0
0 to 99
ON, OFF
1, 2, 3, 4
OFF, LIVE HDR, CINEMA
0.0 to –15 dB
100 to 560 %
–99.9 to +99.9, 0
OFF, ON
–99 to +99, 0
–99 to +99, 0
OFF, ON
–99 to +99, 0
1, 2, 3, 4, 5
A, B, C, D
37
Description
Note
When you turn REDUCTION ON or OFF, noise may
be generated. This is not a malfunction.
Specifies the frequency of the lighting power source.
Enabled in HD format.
STANDARD: Corrects flicker without adding an image.
ACM: Corrects flicker by adding images.
Enabled only when STANDARD is selected.
Selects the type of lighting.
Enabled only when STANDARD is selected.
Sets the correction gain.
Enabled only when STANDARD is selected.
Sets the brightness level that invokes correction.
Enabled only when STANDARD is selected.
Turns the over-correction limiter on/off.
Enabled only when ACM is selected.
Selects the combination of frames to add. More frames
are added as the value increases.
Displays the BPU setting.
Enabled only when LIVE HDR is selected.
Gain setting applied to the SDR output.
Enabled only when LIVE HDR is selected.
HDR output contrast ensured by setting SDR GAIN
(display only).
Enabled only when LIVE HDR is selected.
HDR output black offset
Enabled only when LIVE HDR is selected.
KNEE setting applied for HDR
1: Clear
2: 1/4ND
3: 1/8ND
4: 1/16ND
5: 1/64ND
A: Cross filter
B: 3200K
C: 4300K
D: 6300K