Sony HDC-P43 Operation Manual page 13

The TOP MENU screen appears.
<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
4
Turn the MENU SEL knob/ENTER button to align the
arrow marker (,) to OPERATION and press the
MENU SEL knob/ENTER button.
The CONTENTS page of the OPERATION menu is
displayed.
CONTENTS
01.<VF DISPLAY>
02.<VF MARKER>
03.<VF DETAIL>
04.<FOCUS POSITION METER1>
05.<FOCUS POSITION METER2>
06.<FOCUS ASSIST>
07.<ZEBRA>
08.<CURSOR>
09.<BOX CURSOR FILE>
10.<SPIRIT LEVEL>
5
Turn the MENU SEL knob/ENTER button to align the
arrow marker (,) to <VF DETAIL> and press the
MENU SEL knob/ENTER button.
The <VF DETAIL> page is displayed.
<VF DETAIL>
VF DETAIL :
CRISP
FREQUENCY:
FLICKER
AREA
ZOOM LINK:
COLOR DETAIL :
PEAK COLOR
CHROMA LEVEL: 100%
6
Turn the MENU SEL knob/ENTER button to align the
arrow marker (,) to the item to be set and press the
MENU SEL knob/ENTER button.
To use the VF detail signal
Set VF DETAIL to ON to activate the VF detail function to
add the detail signal to sharp edges in the image. You can
adjust the signal level (strength) in the range of 0 to 100%
(default: 25%).
You can adjust the characteristics of the detail signal with
the menu items below.
CRISP: Adjust to eliminate fine portions of the detail
signal.
FREQUENCY: Change the detection band of sharp
edges.
FLICKER: Turn ON/OFF the function to flicker the detail
signal, which makes it easier to check the signal on
a viewfinder screen.
AREA: To limit the area where to display the detail signal.
ZOOM LINK: Set the VF detail level at the WIDE position.
(The VF detail level changes according to the zoom
position.)
To use the color detail
Set COLOR DETAIL to ON to convert the VF detail signal
to a specified color. This makes it easier to check the
00 TOP
03 TOP
ON (25%)
: 0
9M
: OFF
: 70%
ON 100%
ON BLUE
: ON
signal on an LCD screen, including a color viewfinder
screen. The display color can be selected in the column
next to ON.
You can adjust the coloring with the menu items below.
PEAK COLOR: Turn ON/OFF the function to change the
color where the detail signal is strongest.
CHROMA LEVEL: To reduce the chroma components of
the video signal (only for video signals on a
viewfinder).
7
Turn the MENU SEL knob/ENTER button to display
the desired setting and press the MENU SEL knob/
ENTER button.
8
To finish the adjustment, set the DISPLAY/MENU
switch to OFF to exit Menu mode.
Displaying the focus assist indicators
The focus assist indicator function extracts the irregularities of
a subject and converts the integrated values to a level
indicator, which shows the focus condition.
Level indicator (its position and operations can be adjusted.)
Area marker to display the detection area of the focus
(its size and position can be adjusted.)
The focus setting where the indicator shows the maximum
level is the best focus setting.
(The range of the indicator substantially changes depending
on picture elements or shooting environments. Adjust it with
GAIN and OFFSET as required.)
1
Display the CONTENTS page of the OPERATION
menu (referring to steps 1 to 4 in "Adding the VF
detail signal").
2
Turn the MENU SEL knob/ENTER button to align the
arrow marker (,) to <FOCUS ASSIST> and press the
MENU SEL knob/ENTER button.
The <FOCUS ASSIST> page is displayed.
<FOCUS ASSIST>
INDICATOR
MODE
LEVEL
GAIN
OFFSET
AREA MARKER:
SIZE
POSITION
POSITION H: 50
POSITION V: 50
3
Turn the MENU SEL knob/ENTER button to align the
arrow marker (,) to the item to be set and press the
MENU SEL knob/ENTER button.
To use the level indicator
13
06 TOP
: OFF
: BOX BOTTOM
: 3 QUICK
: 50
: 50
ON
: MIDDLE
: CENTER