Paint Menu - Sony HDC-P43 Operation Manual

OPERATION
Page name Item
Page No.
<SWITCH ASSIGN> LENS
12 (U08)
VTR S/S
RET
D-SUB
ASSIGN1
ASSIGN2
<OPERATOR FILE> READ (USB t CAM)
13
WRITE (CAM t USB)
PRESET
FILE ID
CAM CODE
DATE

PAINT Menu

PAINT
Page name Item
Page No.
<SW STATUS> FLARE
P01
GAMMA
BLK GAM
KNEE
WHT CLIP
DETAIL
LVL DEP
SKIN DTL
MATRIX
Settings
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, VF DETAIL,
SPIRIT LEVEL INDICATOR,
FOCUS ASSIST INDICATOR,
PinP, VTR S/S, TALLY R, TALLY
G, CALL
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, VF DETAIL,
SPIRIT LEVEL INDICATOR,
FOCUS ASSIST INDICATOR,
PinP, VTR S/S, TALLY R, TALLY
G, CALL
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, VF DETAIL,
SPIRIT LEVEL INDICATOR,
FOCUS ASSIST INDICATOR,
PinP, VTR S/S, TALLY R, TALLY
G, CALL
OFF, RETURN1 SW, RETURN2
SW, RETURN3 SW, VF DETAIL,
SPIRIT LEVEL INDICATOR,
FOCUS ASSIST INDICATOR,
PinP, VTR S/S, TALLY R, TALLY
G, CALL
Execute using ENTER.
Execute using ENTER.
Execute using ENTER.
Max. 14 characters
Camera code
Date
Settings
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
ON, OFF
32
Description
This function works when each pin of the D-sub
connector contacts with GND (see page 48).
TALLY R and TALLY G are available only in
standalone device or extension mode, and make the
tally lamp light.
Reads the operator file from a USB drive.
Writes the current settings of the operator file items to
a USB drive.
Sets the operator file items to the preset values in
internal memory.
Enters a comment for the operator file to be written to
a USB drive.
See "To specify a character string" (page 18).
Display only
Display only
Description