Sony HDC-P43 Operation Manual page 39

MAINTENANCE
Page name Item
Page No.
<AUTO IRIS> AUTO IRIS
M05
WINDOW
OVERRIDE
IRIS LEVEL
APL RATIO
IRIS GAIN
IRIS CLOSE
<LENS1> F NO. DISP
M06
AF DISPLAY
ALAC
F DROP COMP
MAX GAIN
DROP POINT
ROUNDNESS
STORE LENS FILE
Settings
ON, OFF, (ON), (OFF)
1, 2, 3, 4, 5, 6
–99 to 99, 0, ---
–99 to +99, 0
–99 to +99, 65
–99 to +99, 0
ON, OFF
CONTROL, RETURN
ON, OFF, OFF(EFFECT),
OFF(ASSIST IND)
AUTO, OFF
OFF, ON, (OFF)
0.0 to 24 dB
0 to 99, 50
0.0 to 12 dB
Execute using ENTER.
39
Description
Settings in ( ): When a remote control unit/panel or a
CCU is not connected (cannot be changed)
Selects the auto iris windows:
1 2 3
4 5 6
The shaded parts indicate the area where light
detection occurs.
Sets to temporarily change the reference value for
brightness of the automatic iris level in the range of ±2
steps:
–99: Two steps to fully closed iris.
99: Two steps to fully opened iris.
---: OFF
The setting returns to "---" when the power is turned
off.
±4 steps
Selects the iris indication on the panel when AUTO
IRIS is off:
CONTROL: Displays the value from the camera.
RETURN: Displays the value returned from the lens.
(When AUTO IRIS is on, the value returned from the
lens is always displayed.)
OFF(EFFECT): Displayed when EFFECT of <VF
MARKER> is ON.
OFF(ASSIST IND): Displayed when INDICATOR of
<FOCUS ASSIST> is ON.
With AUTO selected, the status is displayed at the
right.
(ACTIVE): Compensation is in progress.
(WAIT): Waiting for completion of lens initialization.
(STOP): Compensation is turned off for a non-
applicable lens.
Turns F drop compensation on/off.
During compensation, the compensation gain is
displayed on the right.
(OFF): For when a serial lens is not attached.
Maximum compensation value
Compensation start point
Roundness of the compensation curve.
Saves settings to a lens file.