Menu Operations; Starting Menu Operations - Sony HDC-P43 Operation Manual

Note
Displayed only when a serial communication lens is
connected.
h Battery voltage
Displays the input voltage.
i Focus position meter marker name
Displays the marker name of the focus position meter.
j Setting change / adjustment process message area
This area is only used when the MESSAGE item of the menu
is set to other than OFF.
k F value
Indicates the lens F (iris opening) value.
l Return indicator
Displayed when a return image is being displayed. The
number indicates the channel of the displayed return image.
m Shutter/ECS
Displays the shutter/ECS status. Nothing is displayed if the
electronic shutter is set to OFF.
STATUS screen
When the DISPLAY/MENU switch is set to DISPLAY and the
MENU SEL knob/ENTER button is pressed, the following
status screen is displayed.
a
1080-59.94i
OPT LV:
CAM
ssxxxxxxb
ssxxxxxxb
c
b
a Format indicator
The current video format is displayed.
b Light sensor level indicators
This area shows the light sensor levels in segments.
CAM T BPU: Light sensor level at the IN connector (page 9)
of the camera
CAM t BPU: Light sensor level at the CAMERA connector of
the BPU
BPU T CCU: Light sensor level at the CCU connector of the
BPU
BPU t CCU: Light sensor level at the CAMERA connector of
the CCU
Note
If a camera control unit other than an HDCU2000/2500 or
HDCU4300 is connected, correct indications may not be
obtained.
C C
BPU CCU
ssxxxxxxb
ssxxxxxxb
c

Menu Operations

The menu displayed on a monitor connected to the SDI 1
connector enable various settings of the camera to be
configured.
The following controls are used to operate the menus.
Turn the MENU SEL knob/ENTER button on the rear panel to
select menu items or values, and press the knob to apply
(confirm) the selection.
Rear
MENU SEL knob/ENTER button
Turn to select
DISPLAY/MENU switch

Starting Menu Operations

To display a menu page
Set the DISPLAY/MENU switch from OFF to MENU.
The menu page that was last operated will be displayed.
(If it is the first time, the CONTENTS page of the OPERATION
menu will be displayed.)
To display the TOP MENU screen
If you set the DISPLAY/MENU switch from OFF to MENU
while holding the MENU SEL knob/ENTER button pressed,
"TOP" is displayed at the upper right corner of the screen.
Selecting it displays the TOP MENU screen, which lists the
available menus, and you can select the menus on this
screen.
TOP MENU screen
<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
16
Press to apply