System Configuration - Sony HDC-P43 Operation Manual

System Configuration

Note
Production of some of the peripherals and related devices shown in the figures may have been discontinued.
For advice on choosing devices, please contact your Sony dealer or a Sony sales representative.
HDCU4300 connection example
HDC-P43
Lens
(for ENG/EFP)
V shoe
VCT-14
Tripod Attachment
Tripod for portable
camera
a)
The transmission distance with a single-mode fiber cable (ST connector) and optical fiber cable is approximately 5 km (max.).
b)
The SZC-4002/4002M/4002W HFR software option must be installed for HFR (High Frame Rate) imaging at 4×/6×/8× speeds.
AC-DN10
AC Adapter
AC power supply
Single-mode fiber
cable (ST
connector, 1 pair)
HKCU-SM100
CCU Extension
Adapter
USB drive
Dual HD-SDI video outputs
Sync signal input
Return video input
4K video
monitor
Optical fiber
cable
HDCU4300
Camera Control Unit
a)
Hub
5
2K video
monitor
CCA-5
b)
RCP-1000 series
Remote Control Panel
Video Waveform
monitor monitor
Video router
MSU-1000 series
Master Setup Unit