Siemens SXG75 User Manual page 37

of SXG75, FUG us-en, A31008-H8900-A1-1-7619 (07.10.2005, 13:41)
right page (37)
Incoming calls during a call
You may need to register for this
service with your service provider
and set your phone accordingly. Dur-
ing a call, you may be advised that
there is another call waiting. You will
hear a special tone during the call
(page 123). You have the following
options:
Accepting the waiting call in addition to
the first
A
§Swap§/
To swap between the two calls when
two connections are established,
always press
Rejecting the waiting call
§Reject§
Accepting the waiting call, ending the
current call
B
C
Ending calls
B
Or
§Options§
After the
Return to held call?
you have the following options:
§Yes§
§No§
Accept the waiting call.
The current call is put
on hold.
A
.
Press.
End the current call.
Accept the new call.
Press the End key briefly.
Open menu and
select Drop.
display,
You accept the held call.
You end the held call.
Conference
(not during video calls)
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your serv-
ice provider or may have to be
enabled specially.
Once a call has already been
established:
Open menu and select
§Options§
call. The current call
Hold
is put on hold.
Dial a new number. When
J
the new connection is
established ...
... open menu and select
§Options§
Conference. The held call
is joined.
Repeat procedure until all partici-
pants are linked together (up to
5 participants).
Ending a conference
Ending all calls
B
All calls in the multiparty
conversation are ended
when the End key is
pressed.
Ending one call
Open menu and select
§Options§
Drop. Then select the call
to be ended.
Calling 37
b