Siemens SXG75 User Manual page 124

of SXG75, FUG us-en, A31008-H8900-A1-1-7619 (07.10.2005, 13:12)
left page (124)
124 Settings
Divert other call types
All calls/Data/Fax/Messages
§Options§
J
Check status
§Options§
You can check the current divert
status for all conditions. After a
short pause, the current situation is
transmitted by the network and
displayed.
Clear all
§Options§
All set diversions are cleared.
Confirm with
Additional information
Note that the divert is stored in the network
and not in the phone (e.g., when the
SIM card is changed).
Reactivate divert
The last divert has been stored. Proceed
as with "Set divert". The stored number is
displayed. Confirm number.
Select a call type and con-
C
firm with .
Open menu and select
Set.
Enter the number you
want to divert to. Or se-
lect Contacts from the op-
tions menu and select a
contact.
Open menu and select
Check status.
Open menu and select
Clear all.
C
.
All calls
All calls are diverted.
Ç
Symbol in the top line of
the display in standby
mode.
Unanswered
A call is diverted in the following sit-
uations: Not
(see below).
Not reachable
A call is diverted if the phone is
b
switched off or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
b
A call is diverted if another call is in
progress. If you activated
(page 123), you will hear the call
waiting tone during a call (page 37).
Fax
Fax calls are diverted to a number
with a fax connection.
Data/Messages
Data calls are diverted to a number
with a PC connection.
reachable, No reply, Busy
Call waiting
b
b
b
b
b
b
b