Siemens SXG75 User Manual page 29

of SXG75, FUG us-en, A31008-H8900-A1-1-7619 (07.10.2005, 13:11)
right page (29)
Change phonecde
You define the phone code (4–8 dig-
its) when you call up a phone-code
protected function for the first time.
It is then valid for all phone-code
protected functions.
To change phone code proceed as
with Change
Following the third unsuccessful
attempt, access to the phone code
and the functions that use it is de-
nied. Contact the Siemens Service
Centre (page 144).
Clearing SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred.
J
J
J
C
Additional information
If the PUK (MASTER PIN) has been lost,
please contact your service provider.
PIN.
Enter new PIN code and
C
confirm with .
Enter new PIN code again
C
and confirm with
Enter PUK code (MASTER
PIN) provided by your
service provider with the
SIM card in accordance
with the instructions and
C
confirm with .
Confirm.
Preventing accidental
activation
Even if PIN use is deactivated
(page 19) confirmation is required
to switch on the phone.
This prevents accidental activation
of the phone, e.g. when you are
carrying it in a bag or when you are
travelling in an aircraft.
B
§OK§
§Cancel§
Connecting to Windows
PCs
. You can connect your phone to a
Windows® PC using IrDA, Bluetooth
or a data cable (accessories,
page 149). The Windows® PC
program MPM (Mobile Phone
Manager, page 138) enables you to
backup data on your Windows® PC
and to synchronise the contacts with
Outlook®, Lotus Notes™ and other
Siemens phones (as well as some
Gigasets). You can download the
Mobile Phone Manager from the
Internet at:
www.siemens.com/sxg75
Security
Press and hold.
Press. The phone
switches on.
Press or take no action.
The phone does not
switch on.
29
®