Grizzly G0777 Owner's Manual page 27

14. Install hand crank on shaft with (1)
⁄ " hex bolt and (1)
3
4
Figure 28).
x 1
Figure 28. Installing crank handle.
15. Install 2" casters to bottom of drum using (4)
⁄ "-16 hex nuts, (4)
3
8
(4) ⁄ " lock washers (see Figure 29).
3
8
x 4
Figure 29. Collection drum casters installed.
Model G0777/G0777HEP (Mfd. Since 04/19)
⁄ "-18 x
5
16
⁄ " fender washer (see
5
16
⁄ " fender washers, and
3
8
16. Install lid latches to side of drum using (6)
#10-24 x ⁄ " Phillips head screws and (6)
3
8
#10-24 hex nuts (see Figure 30).
Note: To avoid bag snags, place screw
heads inside of drum with shanks facing out-
ward, as shown in Figure 30.
Latch (1 of 3)
Figure 30. Installing lid latch (1 of 3 shown).
17. Place dust collection bag seat into collection
drum (see Figure 31).
Bag Seat
Drum
Figure 31. Installing the dust collection bag seat.
x 6
-25-