Download  Print this page

Troubleshooting - Philips DECT 522 User Manual

Dect 6.0 digital cordless phone
Hide thumbs

Advertisement

7471 – hilips DE
EN
Problem
The
icon is not
blinking when the handset
is placed on the base
No dialling tone
Poor audio quality
The
icon is blinking
The handset display is not
available
...when attempting to add
another handset to the
base station
42
522-UG_3111-285-31161-(GB).indd
42
CT 522 –
3111-285-31161-
B) – 1

Troubleshooting

Solution
• Bad battery contact – move the handset slightly
• Dirty contact - Clean the battery contact with a
cloth moistened with alcohol
• Battery is full – no need to charge
• No power – check the connections. Reset the
phone: unplug and plug back in the mains
• Batteries are empty - charge the batteries for at
least 24 hours
• You are too far from the base station - move closer
to the base station
• Wrong line cable - use the line cable provided
• Line adaptor (when needed) is not connected to the
line cord – connect the line adaptor (when needed)
to the line cord
• The base station is too close to electrical appliances,
reinforced concrete walls or metal doorframes -
move the base station at least one metre away from
any electrical appliances
• Handset is not registered to the base station -
register the handset to the base station
• You are too far from the base station - move closer
to the base station
• Try again by disconnecting and connecting the base
station power supply and follow the procedure to
register a handset (see page 39). Remove and place
back the handset batteries
• Maximum number of 5 handsets has been reached
– unregister a handset in order to register a
new one.
14.06.06
14/6/06
17:02:5

Advertisement

loading

  Related Manuals for Philips DECT 522