Important Information; For Your Safety; Installation Requirements; Need Help - Philips DECT 522 User Manual

7471 – hilips DE
EN

For your safety

This equipment is not designed to make emergency calls in the event
of a power failure. An alternative has to be made available to allow
emergency calls.
• Do not allow the product to come into contact with liquid.
• Do not open it as you could be exposed to high voltages.
• Never use any battery type other than the one supplied.There is a risk of explosion if
the batteries are replaced by an incorrect type. Dispose of used batteries according to
the instructions (see page 44).
• When the phone is ringing or when activating the loudspeaker, please do not hold the
handset too close to your ear as it may damage your hearing.

Installation requirements

This product requires an electrical supply of 220–240 volts, alternating monophased
power, excluding IT installations defined in standard EN 60-950. In case of power
failure, the communication can be lost.
The electrical network is classified as hazardous according to criteria in the standard
EN 60-950.The only way to power down this product is to unplug the power supply
unit from the electrical outlet. Ensure the electrical outlet is located close to the
apparatus and is always easily accessible.
The voltage on the network is classified as TNV-3 (Telecommunication Network
Voltages), as defined in the standard EN 60-950.

Need help?

Troubleshooting on page 42
Online help: www.p4c.philips.com
4
522-UG_3111-285-31161-(GB).indd 4
CT 522 – 3111-285-31161-

Important information

B) – 1 14.06.06
14/6/06 17:02:0